Cleaning The Sling And The Lift - Invacare Stand Assist Manual Del Usuario

Invacare® Stand Assist
Date of Inspection:
THE CASTER BASE
q
Inspect for missing hardware.
q
Base opens/closes with ease.
q Inspect casters and axle bolts for tightness.
q Inspect casters for smooth swivel and roll.
q Inspect and clear wheels of debris.
q
Inspect pivot joints for wear.
SLINGS AND HARDWARE
q Check all sling attachments each time it is used to
ensure proper connection and patient safety.
q Inspect sling material for wear.
q
Inspect straps for wear.
q
Inspect stitching.
THE ELECTRIC ACTUATOR ASSEMBLY
q Check for leakage.
q Inspect hardware on mast, boom and base.
q
Check for wear or deterioration. If damaged, return
to factory.
q Cycle to ensure smooth quiet operation of the
electric actuator.
38
Initials: THE LIFT ARMS AND LINKAGE
q
Check all hardware and attachment points.
q Inspect for bends or deflections.
q Inspect bolted joints of the lift arms for wear.
q Inspect to ensure that the lift arms are centered
between the base legs.
q
Inspect pivot joints for wear.
q Check sling hooks for wear or deflection.
THE MAST
q Mast must be securely assembled to lift arms.
q
Inspect for bends or deflections.
q
Inspect pivot joints for wear.
CLEANING
q Whenever necessary.

8.2 Cleaning the Sling and the Lift

WARNING!
– After EACH laundering (in accordance with
laundering instructions on the sling), inspect
the sling for wear, tears and loose stitching.
Discard any patient sling that meets these
criteria IMMEDIATELY.
Cleaning the Sling
The sling should be washed regularly in water temperature
not exceeding 203°F (95°C) and a biological solution. Refer
to the washing instructions in the sling user manual.
1078985-I