Installation Of The Adaptation System -Bottom - RK Rose+Krieger Powerlift telescope Manual De Instrucciones

7.5.2 Installation of the adaptation system -bottom-

The adaptation system -bottom- is aligned via the adjustment screws using the integ-
rated circular spirit level.
View on the integrated circular spirit level
 Aligned incorrectly
When installing the adaptation system -bottom- on the lifting column of type Multilift,
note the version of the base plate.
In the lifting columns of type Multilift, without base plate
and base plate without fishplate, M8x35 countersunk-head
screws are screwed into the screw channels of the outer pro-
file of the lifting column through the adapter plate.
In the lifting columns of type Multilift, baseplate with fishpla-
te, M8x16 countersunk bolts are screwed onto the adapta-
tion system from above.
In the lifting columns of type Multilift II, M8x18 countersunk
bolts are screwed onto the adaptation system through the
assembly plate from above.
In the lifting columns of type Multilift Telescope, M8x20
countersunk bolts are screwed onto the adaptation system
through the assembly plate from above.
 Aligned correctly
7. Life phases
45