Installation Of The Adaptation Systems; Installation On The Customers Assemblies / Adaptation System -Top; Installation On The Base / Adaptation System -Bottom - RK Rose+Krieger Powerlift telescope Manual De Instrucciones

7. Life phases

7.6 Installation of the adaptation systems

7.6.1 Installation on the customers assemblies / adaptation system -top-

The installation on the customer assembly is carried out using M10 or M8 screws. These screws
are not included in the product scope of supply and must be provided by the customer.
The following installation versions are possible:
Customer
assembly
Top plate
Guide the M10 screw through the bore in
the assembly and screw together with the
top plate of the adaptation system.

7.6.2 Installation on the base / adaptation system -bottom-

The installation of the adaptation system to the base is carried out using M10 or M8 screws.
These screws are not included in the product scope of supply and must be provided by the cus-
tomer.
The following installation versions are possible:
Adjustment screw
Adapter plate
Pressure plate
Base
M10
Guide the M10 screw through the bore in the
base and screw together with the adjustment
screw of the adaptation system.
50
Top plate
M10
Guide the M8 screw through the bore in
the top plate of the adaptation system and
screw together with the assembly.
M8
Adjustment screw
Adapter plate
Pressure plate
Guide the M8 screw through the adjustment
screw of the adaptation system and screw to-
gether with the base.
Customer
assembly
M8
Base