EN
PRODUCT INSTRUCTION SHEET
Ultrahigh rate Lithium Iron Phosphate battery technology.
•
Ultra light weight- 1/3 of normal lead-acid battery.
•
Low self-discharge,it can be used in a vehicle after one year's storage.
•
Excellent Cycle life-over 1000 cycles under 1C standard(lead acid battery only
•
100-200cycles).
Highly Safety-Lithium Iron Phosphate material and soft pack process ensure the
•
safety performance.
Significant Energy Efficiency-high and stable voltage stage improve rapidly the action
•
efficiency of spark plug which reach fuel-efficient.
Can be installed in any direactions, no need to worry about the leakage.
•
Please strictly follow the instructions, Do not make the battery short circuit, otherwise
•
the battery may smoke, fire and even endanger personal safety!
Do not use the battery in combination with primary batteries(such as dry cell
•
batteries) or batteries of different capacity, type, or brand.
Do not try to take apart the battery! Do not touch the battery directly if the electrolyte leaks.
•
The electrolyte may harm skin&eyes. If skin contact occurs, wash skin immediately with soap
and water. If eye contact occurs, flush immediately with water and get prompt medial help.
The new battery can be used directly if the voltage is above 13V. If you want fully
•
charge the battery before using, a conventional lead-acid battery 12V charger(with
out pulse charging fuction) or a specially designed LiFePO4 battery charger can be
used for charging.
Both vehicle and battery charger need to limit voltage between 14.0-14.8 volts when
•
charging. The battery can not be full charged if charging voltage is less than 14.0
volts, and the battery would be damaged if the charging voltage is over 14.8 volts.
Always remove the battery from the vehicle before charging separately.
•
Charge the battery with a lower current than the MAX Charging Current.
•
After charging, leave the battery for 1 to 2 hours before checking the voltage. If the
•
FULBAT - www.fulbat.com
FEATURES
WARNINGS
CHARGING
2