General Information - EdilKamin AQUAMAXI 28 Instalación Uso Y Mantenimiento

Termochimenea de leña
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 62

GENERAL INFORMATION

AQUAMAXI is designed for heating water and cooking by
burning wood in the combustion chamber.
The water contained in the thermo replace is heated and sent
into the heating system (radiators, heated towel rails, under o-
or heating panels) and also heats the room in which it is located
via natural convection radiation.
The thermo replace MUST NEVER FUNCTION WITHOUT
WATER IN THE SYSTEM.
The water is heated by circulating in the cavity that touches all
the walls of the combustion chamber and the upper boiler.
The cavity is made of sheet steel and the inner lining of the
combustion chamber is made of very thick refractory bricks
suitable for cooking, and easily replaced.
The hearth is closed in the front by a door (silk-screen printed
glass) that slides up and down and side to side for cleaning the
glass.
AQUAMAXI is available in the following versions:
- with single coil
- with double coil
- with single coil, with open-tank hydraulic kit and built-in
electronic control unit (left or right)
Each coil can be used for:
1) the production of domestic hot water; pay attention to the
water hardness, can cause limescale deposits)
2) the separation of the primary circuit from the secondary
circuit.
3) a closed-tank installation with optional valve
- 26
-

Publicidad

Tabla de contenido
loading

Tabla de contenido