sylvac S Dial WORK Smart Instrucciones De Uso página 15

7. Favourite key
The «favourite» key gives direct access to a predefined function, and can be configured according to the needs of the user.
In order to assign a function to the «favourite» key, give a prolonged press on
Data
transmission
(default)
Hold display
Re-initialise
Min-Max-Delta
Zero reset
Validation of selection: By a prolonged press on
Note :
- A function can also be assigned via RS232 using the command <FCT + Function No.> (FCT 0..9 A..F)
example : Toggle unit = <FCT9>, reverse measurement direction = <FCTB>.
bt
REF1 - REF2
Recall Preset
Nor-Min-Max-
Delta
Tol ON - Tol OFF
or a short press on
15
, and then select the required function :
Bluetooth
ON-OFF
®
(depending on model)
mm – IN
0.01 ↔ 0.001 or
0.001 ↔ 0.0001
Measurement direction,
positive - negative
or .
SET MODE
E
12
1:1 - N:
1 factor
No function
13 no. F