Switching The Plate Burner On And Off; Switching The Top Burner On And Off - Angelo Po 1G1FAPG Manual De Uso

Lighting
Important
The first time the griddle is switched on,
wash the plate to remove the protective
grease and any dirt, then switch on the ap-
pliance and preheat it for about 1 hour at
the minimum power setting.
1-Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1) while at the same time pressing the pi-
ezoelectric ignition knob (B) repeatedly to light
the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
4 - Turn the knob anti-clockwise (pos. 2) to light
the burner.
5 - Turn the knob gradually anti-clockwise to
adjust the power of the flame down to the
minimum setting.
Turning off
1-Turn the knob clockwise (pos. 3) to turn the
burner off.
IT IT
Lighting
1-Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
GB GB
(pos. 1) to light the pilot light.
3 - Keep the knob pressed for about 15 sec. to
DE DE
prime the thermocouple.
4 - Turn the knob anti-clockwise (pos. 2) to light
FR FR
the burner.
5 - Turn the knob gradua lly anti-clockwise to ad-
ES ES
just the power of the flame down to the mini-
mum setting.
Turning off
1-Turn the kno b clockwise (pos. 3) to turn the
burner off.
The pilot light will remain on to allow the burner
to be re-lit.
2 - Turn the knob clockwise (pos. 4) to turn off the
pilot light.
3 - Turn off the knob to ensure safety.
English

SWITCHING THE PLATE BURNER ON AND OFF

SWITCHING THE TOP BURNER ON AND OFF

The pilot light will remain on to allow the bur n er
to be re-lit.
2 - Turn the knob clockwise (pos. 4) to turn off the
pilot light.
3 - Turn off the knob to ensure safety.
A
- 10 -
1
2
3
4
IDM-39618500500.tif
1
2
3
4
IDM-39618500600.tif
B A