Digital; Mains Connection - TechniSat DiGYBOXX T4 Instrucciones De Funcionamiento

4.4.2 Digital

f If your amplifier is equipped with an appropriate electrical input, connect the digital
(electrical) audio output with the electrical input on your amplifier.
Depending on the particular station, sample rates of 32 kHz, 44.1 kHz and 48 kHz are avail-
able. Also, if it is broadcast, the Dolby Digital signal (AC3) is present at this output.

4.5 Mains connection

The digital receiver should not be connected to the mains power supply until after all of the
connections with other components have been made. This helps to avoid damage to the
digital receiver, as well as to other components.
g
After all of the connections have been made, use the included mains adapter to con-
nect the receiver to an electrical outlet (230 V/50-60 Hz).
12