Basic Setup; Antenna Adjustment - TechniSat DiGYBOXX T4 Instrucciones De Funcionamiento

Basic setup

You make the display format and antenna feed settings in this installation step.
Use the up/down arrow buttons to highlight the Display Format row, and then
>
use the left/right arrow buttons to set the display format to 16:9 or 4:3.
To activate the antenna feed, highlight the antenna feed 5V row, and then use the
>
left/right arrow buttons to switch the feed on or off.
Use the up/down arrow buttons to highlight the Proceed row, and then confirm
>
by pressing OK to proceed to the Antenna adjustment item.

Antenna adjustment

In this installation step, you can use the signal strength and signal quality indicators to adjust
the antenna optimally.
Use the up/down arrow buttons to select the Channel field.
>
Use the left/right arrow buttons to select a channel on which DTT programmes
>
are broadcast.
> Adjust the antenna so that the signal strength and signal quality indicators show their
strongest levels.
Use the up/down arrow buttons to highlight the Proceed field, and then con-
>
firm by pressing OK.
14