Accessing Blocked Programmes; Infobox; Volume Control - TechniSat DiGYBOXX T4 Instrucciones De Funcionamiento

Confirm by pressing OK.
>
The Favourites A list appears, which contains all of the programmes that you
added to it (see section 8.1).
Use the up/down arrow buttons to highlight the programme that you would like
>
to watch.
Confirm by pressing OK.
>

7.2.4 Accessing blocked programmes

When you select a programme that is blocked by the child lock, the Receiver PIN
message will appear on the screen.
Use the number buttons to enter your PIN code. The desired programme will be
>
tuned in.
Or
> Switch to a programme that is not blocked.
When the parental settings are activated (see section 8.2), you will always be asked to enter
the PIN code when you switch to a blocked programme.

7.2.5 Infobox

Every time you switch programmes, an information box showing the programme position
and the name of the selected programme is briefly displayed. It also indicates additional
programme features, such as
programmes. If broadcast, the EPG genre and the film's rating will also be displayed.

7.3 Volume control

You can adjust the volume on your digital receiver. This makes it easier to use the receiver,
because you have all of the important functions on one remote control, and you do not have
to use the remote control for your television set so often.
When you switch on the digital receiver, the volume is set to the level that you previously
selected.
To adjust the volume of your digital receiver, press the Volume + button to increase
>
the volume and the Volume - button to lower it.
Press the Mute button to switch the sound on or off.
>
for teletext, for 16:9 programmes, or
24
for encrypted