Timer Overview - TechniSat DiGYBOXX T4 Instrucciones De Funcionamiento

Rpt
Use the arrow buttons to highlight the Rpt column.
>
Press the OK button.
>
A selection screen with various repeat options is displayed.
1x
Record once
D
Record daily
W
Record once a week
Use the up/down arrow buttons to select the desired function.
Press the OK button to save the setting.
>
Copying the data to the memory
After you have finished programming, press the yellow Accept function button
>
to copy the data to the memory.
If there are overlapping timer events, they will be marked in red.
Use the TV/Radio button to return to normal operation.
>

7.13.2 Timer overview

The timer overview shows all of the timer events that have already been programmed.
To access the Timer overview menu, open the Timer organizing menu as
>
described above.
Use the up/down arrow buttons to highlight the Timer overview row.
>
Confirm by pressing OK.
>
7.13.2.1 Changing programmed timer events
To change an existing timer setting, use the up/down arrow buttons to highlight
>
the timer event that you want to change.
Press the yellow Modify function button to access the settings for the highlighted
>
timer event. You can now edit this event as described in section 7.13.1.
After you have finished programming, press the yellow Accept function button to
>
copy the data to the memory.
7.13.2.2 Deleting programmed timer events
To delete an existing timer setting, use the up/down arrow buttons to highlight it.
>
Press the green Delete function button.
>
The following message appears: "Really delete this timer?"
Use the left/right arrow buttons to highlight "Yes".
>
To delete the timer event, confirm by pressing OK.
>
7.13.2.3 Programming a new timer event
To program a new timer event, use the up/down arrow buttons to highlight an
>
empty row in the Timer overview menu.
Pressing the yellow New function button opens an input screen where you can pro-
>
gram a new timer event. You can now edit this event described in section 7.13.1.
After you have finished programming, press the yellow Accept function button to
>
copy the data to the memory.
32