INSTALLATION
Operator Dimensions
Prepare and Install the Mounting Plate
The instructions and illustrations in this manual are examples ONLY. Your installation may vary
depending on space, obstructions, and accessories. It is up to the installer to select the most suitable
solution.
1. Dig a hole to the side of the gate (Figure 1). The concrete pad should be deeper than the frost line.
Check all national and local codes.
Figure 1
3.98 cm
(1.57")
294 mm
270 mm
23.97 cm
(9.44")
39.97 cm
(15.74")
218 mm
8