Accessories; Recommended Cutting Equipment; Kickback And Guide Bar Nose Radius; Filing Equipment And Filing Angles - McCulloch CS 35 Manual De Usuario

Recommended bar lengths, cm/in
Usable cutting length, cm/in
Pitch, mm
Thickness of drive links, mm/in
Type of drive sprocket/number of teeth
Saw chain speed at 133% of maximum engine power
speed, m/s

Recommended cutting equipment

Chainsaw models McCulloch CS 35, CS 35S have been
evaluated for safety according to (Machinery for forestry
- Portable chainsaw safety requirements and testing)
and fulfill the safety requirements when equipped with
the below listed guide bar and saw chain combinations.
Guide bar
Length, in Pitch, in
14 3/8
16 3/8

Filing equipment and filing angles

Using McCulloch file gauge will give you the correct
filing angles. We recommend you to always use a
McCulloch file gauge to restore the sharpness of the
16 5/32 in / 4.0
mm
1216 - 002 - 01.09.2020

Accessories

Gauge, mm Max. nose ra-
dius
1.3 7T
1.3 7T
80° 30°
McCulloch CS 35
35-40 / 14-16
33-38 / 13-15
3/8 / 9.52
1.3 / 0.050
Spur/6
22.8

Kickback and guide bar nose radius

For sprocket nose bars the nose radius is specified by
the number of teeth, such as 10T. For solid guide bars
the nose radius is specified by the dimension of the
nose radius. For a given guide bar length, you can use a
guide bar with smaller nose radius than given.
Type
14" 91-52 DC
16" 91-56 DC
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
0°
McCulloch CS 35S
35 / 14
33-38 / 13-15
3/8 / 9.52
1.3 / 0.050
Spur/6
22.8
Saw chain
Type Length, drive
links (no.)
91PJ052X (Or- 52
egon)
91PJ056X (Or- 56
egon)
0.025 in/0.65
mm
27