Descargar Imprimir esta página

Pizza Function - Breville the Smart Oven Pro Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

PIZZA FUNCTION

The PIZZA function melts and browns cheese
and toppings, while crisping up the pizza crust.
1. Insert the wire rack, with the spokes
facing upward, into the middle rack
height position.
2. Close the oven door.
3. Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
PIZZA function. The top figure on the
LCD screen indicates the preset PIZZA
temperature of '450°F', while the bottom
figure indicates the preset size of 12". The
preset CONVECTION and FROZEN
settings will also be displayed.
4. The pizza temperature and size can be
adjusted before or during the cycle.
a) The pizza temperature is displayed as
the top figure on the LCD screen. Turn
the TEMPERATURE dial to adjust the
baking temperature from 120°F/50°C to a
maximum of 450°F/230°C.
b) The pizza size is displayed as the bottom
figure on the LCD screen. Turn the TIME
dial to the left to reduce the size, or to the
right to increase it. The pizza sizes range
from 6" to 13".
5. Press the START/CANCEL button to
activate the PIZZA function. The button
backlight will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange. The LCD screen will
indicate a blinking 'PREHEATING'.
6. Once the oven has reached the set
temperature, the temperature alert
will sound.
7. Place food, positioned on the included pizza
pan, on the center of the wire rack so air will
flow around all sides of the food.
8. After the PREHEATING alert has sounded,
the timer will automatically begin to count
down. The temperature and time can be
adjusted during the cycle by turning the
corresponding TEMPERATURE and TIME
dial. The cycle can be stopped at any time
by pressing the START/CANCEL button.
PRESS
9. At the end of the PIZZA cycle, the oven alert
will sound. The START/CANCEL button
backlight will go out and the LCD screen
will illuminate blue.
17

Publicidad

loading