Care & Cleaning
REPLACING THE OVEN LIGHT
WARNING
Always unplug oven and let cool before
replacing bulb. Only use a 25-Watt, 120V, G9
type oven bulb.
1. Remove the wire rack from the oven before
replacing the light.
2. The light is positioned on the left-hand side
of the oven cavity. Position your fingers on
the outside of the light housing and gently
pull the glass cover away from the oven wall
to remove it. If you are unable to pull the
cover off, slide a spoon into the left side of
the light housing and gently lever the glass
cover off. Always hold the glass cover with
the other hand to prevent the cover from
falling and breaking.
3. Remove the used bulb by pulling it directly
out of its holder.
4. Use a soft cloth to insert the new bulb.
Do not directly touch the surface of the bulb
with your fingers as oil from your skin can
damage the bulb.
5. To reattach the glass cover, align the metal
hook with the left side of the light housing.
Slide the opposite end of the glass cover
into the metal bracket on the right side of
the housing, then push the metal hook into
the left side of the housing until it snaps
securely into position.
23