Breville the Smart Oven Pro Manual De Instrucciones página 27

POSSIBLE PROBLEM
The 'preheat' alert
sounds at a lower
temperature than
what is displayed on
the LCD screen.
The LCD screen
displays 'E01'
The LCD screen
displays 'E02'
The LCD screen
displays 'E03'
The LCD screen
displays 'E04'
The LCD screen
displays 'E05'
EASY SOLUTION
•
The 'preheat' alert sounds at 75% of the target temperature. This provides the
fastest, combined preheating and cooking time.
•
This is because when the 'preheating' alert sounds, signaling the user to
open the oven door and insert food, there is dramatic temperature loss
inside the oven. If the alert sounded at 100% of the target temperature,
opening the door would mean a lot of this waiting time is "wasted". We
have calculated that by sounding the alert at 75% of the target temperature,
followed by the oven door being opened to place food inside the oven, that
we still recover to the target temperature up to 2 minutes faster. This is why
the temperature on the LCD screen does not match the target temperature
at the 'preheat' alert. In total, it takes the oven approximately 8–10 minutes
from start-up, including opening the oven door when the 'preheat' alert
sounds, to reach the target temperature. To ensure the fastest heat up
time, the Breville oven uses the maximum allowable power from the outlet
(1500W for baking, 1800W for toasting).
•
The LCD screen will display 'E01' when there is a non-resettable issue with
the appliance. Should this occur, immediately remove the power cord from
the power outlet and call Breville Consumer Support.
•
The LCD screen will display 'E02' when there is a non-resettable issue with
the appliance. Should this occur, immediately remove the power cord from
the power outlet and call Breville Consumer Support.
•
The LCD screen will display 'E03' if the oven temperature is above the set
maximum limit. Remove the plug from the power outlet, allow the oven to
cool for 15 minutes, then plug back in.
•
Call Breville Consumer Support if the 'E03' message continues.
•
The LCD screen will display 'E04' if the room temperature is below the set
minimum. Unplug the oven and relocate to a warmer area.
•
The LCD screen will display 'E05' when there is a non-resettable issue with
the appliance. Should this occur, immediately remove the power cord from
the power outlet and call Breville Consumer Support.
27