Medisana TENS TDD Instrucciones De Manejo página 34

GB
3 Operating
30
F
On/Off = on/off key
With this key you can switch this device on and off (now own display symbol
is shown, the factory setting appears in the display when the device is switched
on).
IMPORTANT
This function is always active, if you have set the treat
ment yourself as well as with the therapy with programs.
You can immediately interrupt each therapy with this key.
If the device does not switch off when pressing the key F, the batteries are
empty or the device could be defect. Therefore, first exchange the batteries
(also see "Changing batteries") and try again.
G
Pulse Width = pulse width setting
With this key you adjust the pulse width of the individual current pulses, i.e.
the length during which the current is sent (see diagram 6).
Pulse width
After switching on the device, it is in the factory setting of 50 µsec. By pressing
the key you can adjust the pulse width by steps (50-100-150-200-250µsec).
Low pulse widths (up to 100µs) are preferably used for application in the face
or for pain relief..
Higher pulse widths (from 150 µs on) are used for muscle relaxation, especially
at the trunk, at arms and legs.
H
Ch2 Intensity = intensity higher, channel 2
Description of the key function see C.
J
Ch2 Intensity = intensity reduction, channel 2
Description of the key function see D.
diagram 6