Hella TC-400 Instrucciones De Montaje página 58

GB USING SPARE TIRE
If a Pressure Alert is given and the tire needs to be
1
replaced, it is possible to:
1. temporarily disable the sensor if not fitted with a
sensor => Proceed to Step 8
2. change positions on screen in case your spare
tire is equipped with a sensor => proceed to Step 2
Note: the Left Front location in this manual is only
used as an example
While pressure alert is active, press and hold Check
2
5 5 8 8
button for 5 seconds until confirmation beep tone
sounds.
(e.g.) Left Front and Spare Wheel locations light up
3
sequentially.
4
Press Check button to accept the change => Spare
Wheel replaces (e.g.) Left Front. A beep tone
confirmation acknowledges the change.
5 Once repair is done and to reinstate the original
(e.g.) Left front tire/sensor combination, press and
hold Check button for 5 seconds until confirmation
beep tone sounds.