Switching The Appliance On And Off - Angelo Po 0N1FR1G Manual De Uso

Lighting
Turn on the gas supply tap.
1)
Turn the knob (A) clockwise(1 setting) to turn
2)
the gas and power supply on and off .
The mains ligh (C) comes on.
Open the hatch (E).
3)
Press and turn the knob (B) anti-clockwise (pos. 3)
4)
to turn on the pilot light. Hold the knob down for
approximately 15 sec. to start up the thermocou-
ple.
Press and turn the knob (B) anti-clockwise (pos. 4)
5)
to light the burner.
Close the hatch (E).
6)
Turn the knob (A) clockwise (pos. 1) to the tem-
7)
perature required.
The temperature light (D) comes on to indicate
that the oil is not at the working temperature.
The light goes out when the temperature is
reached.
Turning off
Open the hatch (E).
1)
Press and turn the knob (B) clockwise (pos. 5) to
2)
turn off the burner.
The pilot light will remain on to allow the burner
to be re-lit.
Press and turn the knob (B) clockwise (pos. 6) to
3)
turn off the pilot light.
GB
Turn the knob (A) (pos. 2) to turn off the electri-
4)
city supply. The mains light (C) goes out.
Turn off the gas supply tap.
5)
Close the hatch (E).
6)
Cut off the mains electricity supply using the
7)
appliance's master switch.
3269850_ut_GB_rev.1

SWITCHING THE APPLIANCE ON AND OFF

A
3
B
6
- 10 -
A
A
D C
1
2
4
B
E
5
ENGLISH