Battery And Fuse Replacement; Auto Backlight - Ideal 61-797 Manual De Instrucciones

Read the stored value of PI test under RECALL mode
Auto Power Off (Battery Saver)
Restore power by switching the Function Selector or by pressing
any button.

Auto Backlight

The backlight is automatically turned on in a dark environment.
Buzzer
The Meter beeps once for every valid key-press, and beeps twice for
every invalid key-press.
13
Power-up options:
Press button while turning meter on from OFF position.
Lock button: display of the software version.
Store button: reset all stored data.
Blue button: disable auto power off.

Battery and Fuse Replacement

Refer to the following figure to replace fuse and batteries.
Testing the Fuse
61-797
TEST
RECALL PI/DAR
COMP STORE LOCK
TEST
PASS
TEST
100V
250V
0
50V
Ω
500V
LPF
1000V
V
OFF
V
Ω
>600V
INSULATION
COM
CAT. IV
FUSED 600V
CAUTION:
• Use only a fuse with the
amperage, interrupt, voltage,
and speed rating specified.
• Fuse rating : Fast, 315mA,
1000V, Min Interrupt
Rating 10000A.
• Replace the batteries as
soon as the low battery
indicator " " appears,
to avoid false readings.
• When the battery is too low
for reliable operation, the meter
displays "bAtt." The meter will
not operate at all until the battery
is replaced.
• 1.5V x 4 alkaline batteries.
• Remove the test leads before
testing the fuse.
• If the display is reading FUSE,
the fuse is bad and should be
replaced.
14