Symbol Definitions; Important Safeguards - DeVilbiss Healthcare 525 Serie Guía De Instrucciones

Ocultar thumbs Ver también para 525 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14

SYMBOL DEFINITIONS

It is mandatory to read and understand the
operating instructions prior to use .
This symbol has a blue background on
the product label .
Electric Shock Hazard . Cabinet to be
removed by authorized personnel only .
This symbol has a yellow background
on the product label .
Danger - No smoking near patient or device .
This symbol has a red circle and
diagonal bar on the product label .
Use no Oil, Grease or Lubricants
This symbol has a red circle and
diagonal bar on the product label .
Do not use near heat or open flames
This symbol has a red circle and
diagonal bar on the product label .
General Warning
This symbol is used throughout this
manual to indicate hazardous situations to
avoid .
Important Information
This symbol is used throughout this
manual to indicate important information you
should know .
Note and Information Symbol
This symbol is used throughout this
manual to indicate notes, useful tips,
recommendations and information .
Federal (U.S.A.) law restricts this device to sale by or on the order of a physician.
This device contains electrical and/or electronic equipment that must be recycled per EU Directive 2012/19/EU- Waste Electrical and Electronic Equipment (WEEE)

IMPORTANT SAFEGUARDS

Read this entire guide before using your DeVilbiss concentrator . Important safeguards are indicated throughout this guide . Pay special attention to all safety information .
Imminently and potentially hazardous information is highlighted by these terms:
DANGER
Indicates an imminently hazardous situation which could result in death or serious injury to the user or operator if not avoided .
WARNING
Indicates a potentially hazardous situation which could result in death or serious injury to the user or operator if not avoided .
CAUTION
Indicates a potentially hazardous situation which could result in property damage, injury, or device damage if not avoided .
IMPORTANT
Indicates important information you should know .
NOTE
Indicates notes, useful tips, recommendations, and information .
READ ALL INSTRUCTIONS BEFORE USING.
SE-525K4
Off
O
On
I
Reset
Alternating Current
Type B applied part
Double Insulated
Hour Meter
Operating Temperature
+35˚C
Range +5 to +35˚C (+41 to
+5˚C
+95˚F)
Atmospheric Pressure
Range 840 to 1010 hPa
(Approximate sea level to
5000 ft)
LOT Number
Catalog Number
Serial Number
Normal Oxygen
Low Oxygen
Service Required
TUV Rheinland C-US
approval mark
C
US
TUV Rheinland Certified
approval mark
Ingress Protection - Protected against finger access to hazardous
IP21
parts; protected against vertically falling water drops .
Manufacturer
European Representative
European Rep CE mark
Keep unit dry .
Maximum recommended
flow rate: 5LPM
Inmetro approval mark
EN - 3

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

525ds525ds-q525ks525ks-lt525ps

Tabla de contenido