Switching The Top Burner On And Off; Lengthy Downtimes Of Appliance; Instructions And Warnings For Use - Angelo Po 0G0FA0 Manual De Uso

SWITCHING THE TOP BURNER ON AND OFF

Lighting
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1) to light the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
4 - Turn the knob anti-clockwise (pos. 2) to light the
burner.
5 - Turn the knob gradually anti-clockwise to adjust
the power of the flame down to the minimum
setting.
Turning off
1 - Turn the knob clockwise (pos. 3) to turn the
burner off.
2 - The pilot light will remain on to allow the burner
to be re-lit.
3 - Turn the knob clockwise (pos. 4) to turn off
the pilot light.
4 - Turn off the knob to ensure safety.

LENGTHY DOWNTIMES OF APPLIANCE

IT
If the appliance is to be out of use for a lengthy pe-
riod, proceed as follows.
GB
1 - Turn off the gas supply tap.
2 - Clean the appliance and the surrounding areas
DE
thoroughly.
FR
ES

INSTRUCTIONS AND WARNINGS FOR USE

To ensure correct use of the appliance, the follow-
ing rules should be adopted.
– Use only the accessories recommended by the
manufacturer.
– The 6 kW burner requires pans with a diameter of
min 160 mm and max 380 mm; the 4 kW burner
requires pans with a diameter of min 140 mm and
max 320 mm.
English
A
A
3 - Spread a film of edible oil over the stainless
steel surfaces.
4 - Carry out all the servicing procedures.
5 - Cover the appliance and leave a few gaps to al-
low air to circulate.
– Always keep the appliance and the surrounding
areas clean.
– When cleaning, use only food-approved deter-
gents.
- 8 -
1
2
3
4
IDM-39614500800.tif