Data Transfer To The Pc And Power Supply Via Usb 2.0 Port - Zeiss Primo Star Instrucciones De Manejo

Carl Zeiss
Videos are recorded in MPEG-4 advanced video coding format (H.264) and saved as a .h264
file. The videos can be played back using standard software, e.g. with the VLC player.
The stored images may not be used for direct diagnosis.
3.5.3.2

Data transfer to the PC and power supply via USB 2.0 port

Maximum power consumption of the built-in camera up to 950 mA!
ATTENTION: USB 2.0 specification defined as maximum = 500 mA / USB port.
The USB port is for supplying power to the binocular tube 30°/20 and can also be used for data transfer
to the PC. A Y-cable is required for transferring data to the PC.
The built-in camera is compatible with ZEN or ZEN lite.
• Insert the mini USB plug (Fig. 21/1) of the Y-cable into the USB 2.0 port (Fig. 21/2) on the reverse side
of the binocular tube 30°/20.
• Insert the two USB 2.0 plugs (Fig. 21/3) into the PC (Fig. 21/4).
If only one plug is inserted, the camera may not receive sufficient power.
No plug-in power supply is required for operation on the PC (Fig. 19/4).
The second USB A-plug must likewise be inserted (two USB ports are occupied).
Fig. 21 Data transfer to the PC and power supply via USB port
The images transmitted from the integrated camera may not be used for direct generation of
diagnostic results.
32
Start-Up and Operation
415500-7344-008
Primo Star / Primo Star iLED
11/2013