Range The Primo Star / Primo Star Iled Microscope In The Carrying Case - Zeiss Primo Star Instrucciones De Manejo

Primo Star / Primo Star iLED
• Carry out this test until the image is format filling without masking or vignetting.
• Retighten the set screw (Fig. 43/5).
With camera / adapter combinations that have not been recommended expressly by Zeiss, it
may be quite impossible to obtain an unvignetted image.
Installing a digital camera, single-lens reflex camera or video camera with C-mount thread
Cameras with C-mount thread are to be connected to the phototube of the microscope by means of the
camera adapter P95-C 2/3" 0.65x or P95-C 1/2" 0.5x (Fig. 43/9).
• Put the video camera (Fig. 43/10) or the single-lens reflex camera (Fig. 43/13) (using the corresponding
T2 adapter for this camera (Fig. 43/12)) together with the corresponding camera adapter (Fig. 43/9 or
11) into the phototube as far as it will go, align it and fasten it by means of the clamping screw
(Fig. 43/8).
3.7.7

Range the Primo Star / Primo Star iLED microscope in the carrying case

• Insert the foam profile for (Fig. 44/2) Primo Star (Fig. 44/1) into the carrying case. Remove the foam
profile (Fig. 44/4). Then range Primo Star in the carrying case.
• Insert the foam profile (Fig. 44/4) for Primo Star iLED (Fig. 44/3) in the carrying case. Remove foam
profile (Fig. 44/2). Then range Primo Star iLED in the carrying case.
Fig. 44 Range microscope in the carrying case
11/2013
Start-Up and Operation
415500-7344-008
Carl Zeiss
49