Cebora WIN TIG GC 250 T Manual De Instrucciones página 22

3) Returning to main screen
hold down for more than 0.7 seconds and
release the knob when the main screen is dis
played
C - POSITIVE OUTPUT TERMINAL (+)
D – NEGATIVE OUTPUT TERMINAL (-)
E – FITTING
(1/4 GAS) Used to connect TIG welding torch gas hose
F - 10-PIN CONNECTOR
The following remote controls must be connected to this
connector:
a) pedal
b) welding torch with start button
c) welding torch with potentiometer
d) welding torch with up/down etc...
From pin 3 to pin 6, the "ARC ON" function is available
G – SWITCH
22
Starts and stops the machine
H – GAS INPUT FITTING
AE – SOCKET to connect the cooling unit Art.1341
WARNING: Max. power: 360VA-Ampere: 1.6.
Do not connect grinders or similar tools
AF – CONNECTOR
Three-pin connector to which the power lead of the pres-
sure switch of the cooling unit is connected
AG – FUSE HOLDER
G
H
AG
H
G
AF
AE