Maintenance & Operational Tips; Accessories And Spare Parts - Loctite 883976 Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7
Maintenance & Operational Tips
®
Use Loctite
Universal Power Supply #8900569 only.
Always disconnect the power supply before servicing the unit.
If using to dispense from syringes without pistons,
optional In-Line Filter 984650 should be installed with the
Air Line Adapter to prevent fluids from entering the unit
Use 5 micron Filter –Regulator –Loctite 985397 or
equivalent for inlet air supply
The dispenser is designed and built to be relatively
maintenance free. To assure trouble free operation, the
following recommendations should be followed:
1. Make certain air supply is clean and dry.
2. Avoid turning barrels upside down or laying barrel so
that material may run through airline to internal
components.
3. Avoid connecting air supply exceeding 100 psi (6.9 bars)
4. Use only Amyl Alcohol to clean outside surface of the
main housing.
5. Use only soft cloth to clean the LCD.
While under warranty, the unit may be
repaired only by an authorized Henkel service
representative
.
8

Accessories and Spare Parts

• Universal Power Cord and Adapter – 8900569
• Foot Switch - 8900571
• Syringe Stand – 98674
• Dual Unit Stacking Lock Pin - 8900574
• Air line Support Mast – 8900575
• 6mm Inlet Air Tubing (10 meters) - 8900581
• Needle Kits and Air Line Adapters – check Disposable
Dispense Components listing at
www.equipment.loctite.com
11

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Loctite 883976

Tabla de contenido