Loctite 883976 Manual De Operación página 9

5.2.2.4 Press the Mode button (2) to switch the Timed or
Incremental Mode as desired. The dispenser is
now ready to dispense this new time cycle
5.2.3 Resetting the Cycle Counter
The cycle counter records the numbers of automatic
dispense cycles being activated. Up to 65,535 cycles
can be recorded. This number is shown at the lower
right hand corner of the LCD. To reset the counter;
5.2.3.1 Press and hold the Set button (3) for two seconds
to enter the Set up mode.
5.2.3.2 Then re-press and hold the Set button (3) for three
to five more seconds to reset the counter. After
two seconds the screen will first show "Saving
Data" but continue holding till the cycle counter
resets to 00000 .
MODE
:Press then release :Press and hold for approximately 2 seconds then release
Prog Time Counter
:Press and hold for approximately 4 seconds then release
POWER MODE SET
Normal Operation
OFF
TIMED MODE
P1 2.250 00004
Power ON/OFF
Setup
TIMED MODE
P1 2.250 00004
SETUP MODE SETUP MODE
P1 2.250 00004 P1 2 .250 2 00004
TIME SETTING
SETUP MODE SETUP MODE
P1 2 .250 2 00004 P1 2 2 .251 00004
TIMED MODE
Save and Exit...
P1 2.251 00004
COUNTER RESET
SETUP MODE
Save and Exit...
P1 2 2 .251 00004
Fig 5.1
9
TIMED MODE
P1 2.250 00004
INCREMENTAL MODE
P1 2.250 00004
MANUAL MODE
*************************
Change Mode
Time setting
in TIMED mode
SETUP MODE
P1 2 2 .250 00004
SETUP MODE
P1 2 .250 2 00004
SETUP MODE
P1 2 .251 2 00004
TIMED MODE
P1 2.251 00000