Harness Buckle Position; Using The Harness Buckle; Using The Chest Clip - Britax ADVOCATE CLICKTIGHT Guia Del Usuario

Britax Child Safety, Inc.
3. Thread the end of the
harness through the
opening on the inside of
the metal bar behind the
anchor to the bottom of
the seating area.
4. Wrap the end of the
harness around to the
outside of the bar and
slide the harness loop
fully onto the anchor
ensuring that it is secure.
5. Repeat on the other side.
NOTE: Hold harness
straps up and away from
seat while closing the
CLICKTIGHT.
Lengthening the Harness
1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT
dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Disconnect the end of
one harness from the
anchor on the bottom
side of the seating area.
3. Unwrap the end of the
harness from the metal
bar and pull to the top of
the seating area.
4. Slide the harness loop
fully onto the same
anchor from the top of the
seating area ensuring that
it is secure.
5. Repeat on the other side.
24
1a
1b
ADVOCATE/BOULEVARD CLICKTIGHT User Guide

Harness Buckle Position

The child seat shell contains an
inner buckle slot and an outer
buckle slot. Position the buckle
in the slot closest to but not
under the child.
Reposition the harness buckle
by following the steps on pages
39-41.
NOTE: NEVER leave the buckle in the adjustment slot.

Using the Harness Buckle

To Fasten:
1. Insert one tongue at a
time into the buckle.
Proper connection is
confirmed with a click
after inserting each
buckle tongue.
To Release:
1. Press the release button
and pull the tongues from
the buckle.
NOTE: Periodically clean
the buckle to ensure
proper operation. See
page 44.

Using the Chest Clip

1. Open the chest clip.
a. Press tabs.
b. Pull apart.
2. Push together
to fasten.
NOTE: Always
position the
chest clip at
armpit level.
INNER SLOT
ADJUSTMENT
SLOT
OUTER SLOT
b
a
25