Features; Inverter Features - Westinghouse iGen2300 Guía De Rápida Instalación

FEATURES

INVERTER FEATURES IGEN2300 & IGEN2600
9
5
1 Fuel Cap and Vent (vent: iGen2300 only): Open
the vent to run the engine and close the vent
when the engine is off.
Control Panel: Contains the reset breaker,
2
outlets and warning lights.
3
LED Data Center: Indicates low oil, overload
and output ready. Displays fuel level, power
output, remaining run time, voltage and lifetime
hours.
Engine Service Panel: Turn knob to unlock
4
and remove cover to service the oil, spark plug,
and air filter.
Recoil Handle: Pull to start the engine.
5
Engine Control Switch: Sets the choke, turns
6
the fuel on and off.
8 | Westinghouse Outdoor Power Equipment
6
1
2
3
8
10
Muffler and Spark Arrestor: Avoid contact until the
7
engine is cooled down. The spark arrestor prevents
sparks from exiting the muffler. It must be removed for
servicing.
Engine Cooling Vents: Helps move airflow in unit to
8
regulate engine temperatures.
Recoil Handle Protective Cover: Prevents pull cord
9
wire from damaging inverter body.
10
Oil Access Cover: Remove to service oil.
4
7