Control Panel Features - Westinghouse iGen2300 Guía De Rápida Instalación

FEATURES
CONTROL PANEL FEATURES IGEN2300 AND IGEN2600
120-Volt, 20-Amp Duplex Outlet (NEMA
1
5-20R): The outlet is capable of carrying
a maximum of 20 amps.
USB Duplex: 5V DC that come in 1 amps
2
and 2.1 amps.
3
Reset Breaker: If the inverter is
overloaded, the reset breaker will trip. The
engine will continue to run, but there will
be no output from the inverter. Unplug the
devices and reduce the load. Push in the
reset breaker to reset it.
Efficiency Mode Switch: When turned to
4
the ON position, the engine will sense the
load needed and run at a slower RPM to
save fuel.
5 Ground Terminal: The ground terminal is
used to externally ground the inverter.
12V DC Outlet: Provides 12-volt DC
6
power up to 8 amps.
7
LED Data Center: Indicates low oil,
overload and output ready. Displays fuel
level, power output, remaining run time,
voltage, and lifetime hours.
8 DC Breaker: Limits output of 12V DC
outlet to 8A.
9
Parallel Operation Outlets: These
outlets are used for connecting an
additional inverter generator (with
same outlets) to achieve 30A output.
A Westinghouse approved parallel
operation cable kit (sold separate) is
required for parallel operation.
4
9
6
3
7
Westinghouse Outdoor Power Equipment | 9
2
1
8
5