20 OPERATING
Engine Inclination
Thisenginewilloperateo_ntlnuousty at anglesup
to 25=in any direction.
Refer to the operatinginstructions of the equip
ment this engTnepowers. Becauseof equipment
design or application, t here may be morestringent
restrictions regarding the angleof operation.
CAUTION
Do not operate this e.gine continuously at
angles exceeding 2_' in any direction, En-
gine damage could result from insufficient
lubrication.
STOPPING
STOPMNG
21
Stopping
the Engine
Ordfmry Stop
• Movethroffie lever{A) to SLOW position.
• Lowerthe enginespeedto an idle. Keep running
at idlefor aboutoneminute.
CAUTION
Engine damage can occur from ran-on or
after.burning If engine is stopped suddenly
from high speed loaded operation. Reduce
engine speed to Idle for one minute before
shuttingengine off.
• Turntheenginesw#chor_e switch keyto =OFF"
pos_Eon,
ForControlPanel SwilchType,movethethrottle
lever against itslowspeedend to turnsignition off.
Emergency8top
# Immediately turnthe engineswitchor the switch
key to "OFF"position.
• Closethe fuelvalveon theequipment.
For Control P anel.Switch Type,movethe lhrottle
lever on the equiprne_t againstits lowspeed end,
Movingthe leveraga'mst i ls lowspeedendturnsig-
nitionoff,
m_
Always
remove
Engine Key from switch
when
leaving
equipment
unat_ded
or
when equipment is not in use.
42