Tabla de contenido
Publicidad
TO THE OWNER
This Operator's Manual is an importantpart of your new tractor. The informationcontained in this manual has been
prepared in detail to help you better understand the features, correct operation, adjustments, and maintenance of
your tractor. The performance and dependability of this tractor rely greatly on the manner in which it is operated and
maintained. Therefore, it is recommended that all operators of the tractor carefully read this manual and fully under-
stand its operation. Also keep the manual available for reference to ensure proper operation, and that maintenance
procedures are performed as scheduled to assure the tractor's optimal mechanical condition.
NOTE: All references to LEFT, RIGHT, FRONT, and REAR, unless specifically stated otherwise, indicate that rela-
tive position on the tractor when facing forward while seated in the operator's seat.
CAUTION: DO NOT tow your RZT model tractor. Towing may damage the transmissions. Place the tractor on a
LEVEL SURFACE before pulling the transmission bypass rods to the engaged position (transmission disengaged).
Your localauthorized Cub Cadet dealer is interested in the performance you receive from your tractor, and with the
maintenance needed to ensure the satisfactory operation of your tractor. The dealer has trained service personnel
familiar with the latest servicing information, is equipped with the latest tools, and has a complete line of genuine
Cub Cadet service parts which assure properfit and high quality.
CALLING
SERVICE
INFORMATION
The engine manufacturer is responsible for all engine-related issueswith regards to performance, power-rating, and
specifications.
If you have difficulties with the tractor and/or equipment; have any questions regarding the operation or maintenance
of this equipment; or desire additional information not found in this manual, contact your nearest authorized Cub
Cadet dealer. If you need assistance in locating a dealer in your area, contact the Customer Dealer Referral Line by
calling:
1-877-282-8684
Or you may contact Cub Cadet via the internet by logging on to our Web Site at:
www.cubcadet.com
To obtain top performance
and assure economical
operation,
the tractor should be inspected
by your authorized
dealer periodically
or at least once a year, depending
on its hours of use. Before calling your dealer, make sure that
you have your model number(s)
and manufacturing
date available
for the dealer,
RECORDING
MODEL AND SERIAL
NUMBER
INFORMATION
Product identification plates are provided for major components of your tractor. The numbers on these plates are
important if your tractor should require dealer service, or ifyou need additional information on your tractor. Prior to
using your tractor for the first time, record the numbers from the identification plates in the appropriate spaces pro-
vided below.
The chassis model plate, showing the factory model number and Mfg. Date (See Figure 4) can be found either on
the underside of the seat mounting base or on the right frame rail near the right front tire.
The engine information appears on a decal and label affixed to each side of the engine blower housing.
Model
Factory Model No.
Mfg. Date-S/N
Delivery Date
Family I.D.
Displacement
Date of Mfg.
Serial No.
i
XXXXXXXXXXX
XXXXXXXXXX
Model Number
Mfg. Date
P.
O.
BOX
31_1131
_Nw.cul_adst
cm
_,
OH
4_1_
>gJ_LER
LOC_70R
PHON_
N UMS_J_:
_77-2BZ_B_B4
i
i
Figure 4
Publicidad
Tabla de contenido
