SCHUBERTH F300 Manual Del Usuario página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
F300
Congratulations!
You have made a very good choice in your SCHUBERTH F300 high-performance
fire and rescue helmet. This helmet is a SCHUBERTH quality product that has
been specially developed for increased thermal stress and meets the high-
est safety and performance standards in the field. It meets standard DIN EN
443:2008. Protective helmets are personal protective equipment and as such
they contribute to the prevention, or at least the substantial reduction, of
head injuries.
Please read these instructions carefully to ensure that your helmet can protect
you correctly during use and that no aspect relevant to your safety is ignored.
The most important changes to EN 443:2008 in summary
New requirements:
Classification of helmet form into Type A (open-face helmet) and
Type B (full-face helmet)
Increased resistance to flame (flame-engulfment test)
Visor tested to EN 14458
Effectiveness and strength of the retaining system
Protective characteristics against molten metal and hot objects
No visible damage after contact with liquid chemicals (optional)
Erhöhte Anforderungen:
Resistance to radiant heat (14 kW/m²)
Followed by penetration test: for this, the weight is increased
from 400 g to 1000 g
Electrical insulation capacity (E1, E2, E3)
The SCHUBERTH F 300 corresponds to Model A helmet form and
meets the requirements of DIN EN 443:2008.
18
EN
Instructions for use
The SCHUBERTH F 300 firefighter's helmet is intended for use in firefighting in
buildings, rescue/recovery work, for work in connection with road traffic
accidents and in general for all work that falls within the scope of firefighters'
duties. Any other applications must be excluded and shall release SCHUBERTH
from any liability.
Attention: The protective function can only be attained if the helmet fits
optimally, the headband has been adjusted to the head circumference and
the chinstrap/neckstrap is closed. Removable parts must not be worn
separately. Only wear the helmet when it is fully assembled.
Attention: The helmet is designed to absorb the effect of only one
impact. Like the crumple zone of a car, the impact energy of a collision is
absorbed by the complete or partial destruction of the helmet shell
structure. Even if damage is not immediately visible, the helmet is to be
replaced after any impact or forceful blow.
Liability for function and/or damage
The liability for the function of the SCHUBERTH F 300 firefighter's helmet shall
be borne by the owner or operator if the SCHUBERTH F 300 firefighter's helmet
is incorrectly maintained or repaired by any person who does not belong to
SCHUBERTH GmbH or has not been trained by SCHUBERTH GmbH, or if it is
handled in any way that is contrary to the intended use. SCHUBERTH GmbH
accepts no liability for damage caused by failure to comply with the above
instructions.
19

Publicidad

Tabla de contenido
loading

Tabla de contenido