General Instructions; Transport And Handling; Risks; Ass Em B L Y - CTX NEXT Manual De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GENERAL INSTRUCTIONS

Transport and handling

Transport must be carried out with respect to the orientation shown on the packaging. Shipping carried out by
whatever means, even if carriage paid to the buyer or recipient, is at the buyer's risk. A claim for missing materials
must be received within 10 days of receipt of the goods, and within 30 days for defective goods. If the instrument has
to be returned it must be agreed beforehand with authorised personnel or with the official distributor.

Risks

Once the packaging has been removed, check the equipment, and if in doubt do not use the equipment and
consult with qualified personnel. The packaging materials (such as plastic bags, polystyrene, etc..) must not be left
within reach of children as they are potential sources of danger.
Before connecting the equipment, make sure that the nameplate data corresponds to that of the power
distribution network. The nameplate data is shown on the adhesive label attached to the equipment.
The electrical installation must comply with the rules in force in the country where the plant is installed.
The use of any electrical equipment involves the observance of some fundamental rules. In particular:
In case of failure and / or malfunction of the equipment, turn it off and do not tamper with it. For any repairs please
contact our service centres and request the use of original spare parts. Failure to comply with the above may
compromise the safety of the equipment.
If you decide to no longer use the installed equipment it is recommended to make it inoperative by disconnecting
it from the power supply.
Assembly
All equipment is usually supplied already assembled. For greater clarity, you can consult the attachment at the
bottom of the manual which illustrates an enlarged view of all the details with their nomenclature, so that you can have
a complete picture of the equipment components.
Disassembly
For the dismantling of the equipment or before starting work on it:
Warranty
2 years (excluding parts subject to normal wear). Improper use of the equipment invalidates the warranty.
The warranty is intended to be Ex Works or authorised distributors.
ENGLISH
44
do not touch the equipment with wet or damp hands or feet;
do not operate the equipment with bare feet (e.g. swimming pool equipment);
do not leave the equipment exposed to atmospheric agents (rain, sun, etc.)
do not allow the instrument to be used by children or by an incapacitated person without supervision.
Make sure that it is turned off electrically (both polarities) by disconnecting the connection cables from
the contact points of the network through the opening of a phase switch with a minimum contact gap of
3 mm (Fig. 11).

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Qxb0005101ctQxb0005201ctQxb0005202ctQxb0005301ct

Tabla de contenido