DKN technology XC-170i Manual De Instrucciones página 22

Adjust the Stride Length
Red
The DKN Motion Trainer is equipped with three adjustable stride lengths from 18'' (457mm)
to 23'' (584mm)
To adjust the stride length:
Loosen and pull the Right Pull Pin (54).
Move the Right Telescope Bar (10) to the proper desired position (Red position for 23'', Blue
position for 20'', White position for 18'').
Release the Right Pull Pin (54) and make sure the pin safely clicks into it's position.
Repeat the above process to adjust the stride length on left side.
NOTE:
1. Always adjust the Right & Left Telescope Bars (10) in the same training position.
2. Securely tighten Right & Left Pull Pin (54) before exercising.
Moving the Motion Trainer safely
Blue
White