Intended Use; Assembly - STERWINS 320 EP-2 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 28
2.
Do not operate the machine if it is not in perfect working order. The appliance
wants to a thorough visual check before using it. In particular, check that
protective equipment, Electrical controls, current-carrying cables and threaded
connections are not damaged and are secure.
3.
Replace damaged parts before operating the unit.

INTENDED USE

This lawn mower has been designed for cutting grass. Any other use is not
permitted. The lawn mower is suitable for private use in the garden only, lawn
mowers for private use are those which are used for cutting grass and lawns in the
garden, however not for cutting grass in public parks, playing fields or on farms or in
forest.
Non-permitted users:
Persons who are not familiar with the operating manual, children, and young people
under the age of 16 as well as persons under the influence of alcohol, drugs or
medication must not operate the unit.
Working hours for electric lawn mower
While it is permitted to use a lawn mower at any time, operators should always show
due consideration to others living nearby.

ASSEMBLY

1. Handle assembly
When assembling this machine, please follow the instructions for assembly printed.
Towards the front of the manual (fig 3, 4 )
1). Fit the upper handle[1] and lower handle[4] together with the quick release
lock[3] system. You can rotate the quick release lock[3] to adjust the tightness
of lock.
2). Insert the lower handle[4] into the hole on machine deck[7] and push the handle
downwards to ensure the low handle[4] touch the bottom on the deck. And then
screw the ST5.2 screw[8] in to fix the handle.
2. Grass bag assembly (FIG 5, 8)
1). Place the metal frame inside the grass collection bag[5].
2). Clip the plastic clips over the metal frame.
3). Make sure that these clips are fully secured to the metal frame.
4). Hang the collection bag[5] on the hook as shown in fig 8.
3. As fig 6 shows, fix the cord by the cord clip and cord grasper
Note: The packaging material is made of recycle materials. Dispose of packaging
materials in accordance with regulations.
EN - 16

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido