Panasonic NN-DS596M Manual De Instrucciones página 46

Using the timer
To set a standing time
By using the Timer, you can program Stand Time after cooking is completed or use to
program the oven as a minute timer.
Select Cooking
Method
& Time
Set the cooking program,
by entering cooking
method and time required.
Example:
1000 W (Max): 4 mins
Tap Micro Power
once.
Set the standing time to
5 minutes using the
Time/Weight dial.
Note
1. Three-stage cooking can be programmed including stand time.
2. If the oven door is opened during the stand time or minute timer, the time in the
display window will continue to count down.
3. If the programmed stand time exceeds one hour, the time will count down
in units of minutes. If less than one hour, the time will count down in units of
seconds.
4. This feature may also be used as a minute timer. In this case touch the Timer/
Clock, set time and touch Start.
5. Standing time cannot be used after an auto program.
44
EN
Touch Timer/Clock Set the standing time using
once. the Time/Weight dial (up to
9 hours).
Stand Time: 5 mins
Set the cooking time to
4 minutes using the
Time/Weight dial.
Tap Micro Power
once.
1000 W (Max): 2 mins
Touch Timer/Clock
once.
Set the cooking time to
2 minutes using the
Time/Weight dial.
Touch Start.
Touch Start.