Cleaning the water tank
Clean with a soft sponge in water.
Remove the water tank and clean the
compartment where the water tank is
inserted.
If the pipe cap is difficult to remove, wiggle
from side to side. When re-fitting, make sure
that the pipe faces down (see diagram).
The front of the tank can also be removed for cleaning.
Removing the front cover
1
Re-fitting the front cover
1
Note
Clean the water tank at least once a week to prevent build up of limescale.
Do not use a dishwasher to clean the water tank or parts of the water tank.
Open the water supply cap, remove the lid
and pipe cap and clean.
Pipe Cap
Ensure it faces downwards
1. Lightly twist the cover until the far side
2
2. Continue to twist until the near side
1. Align the slots on the cover with the holes
2
2. Insert and push down until it clicks.
unclips.
unclips.
on the tank.
59
EN