Reassembling The Loctite ® Vari-Drop - Loctite Shot Miser 98116 Manual De Operación

6 Maintenance and Cleaning (Continued)
6.2.3 Reassembling the Loctite
Henkel Loctite Corp.
Air Cylinder
Cilindro De Aire
# 986131
Depress The Vari-Drop™ Lever To
Horizontal Then Slide The Vari-Drop™
Down Into The Clamp.
•
Connect the product supply tube to the Loctite
•
Connect the control air line to the fitting on the air cylinder.
•
Attach the Loctite
•
Prime the Loctite
•
The Loctite
®
Vari-Drop™
Position #10-32 Screws
In Clamp & Cover
Figure 6
®
Vari-Drop™ to the mounting bracket.
®
Vari-Drop™ per the instructions on pg. 8 of this manual.
®
Vari-Drop™ is now ready for operation.
Vari-Drop™
Apply Lithum Grease To
Vari-Drop™ Lever
Henkel Loctite Corp.
Air Cylinder
Cilindro De Aire
# 986131
Then Slide The Vari-Drop™ Forward Into The
Clamp So That The Luer-Lok Adapter Is At
The Specified Dimension Beyond The Clamp.
®
Vari-Drop™.
Position Cover Over The
Vari-Drop ™ & Clamp
Shot Miser ™
Dispense Valve
Válvula Dosificadora
# 98085
Replacement Parts:
Refacciones:
™ Valve / Válvula:
# 97132
Air Cylinder / Cilindro De
Aire:
.100
# 986131