1
Please Observe The Following
1.1 Emphasized Sections
Warning!
Refers to safety regulations and requires safety measures that protect the operator or other
persons from injury or danger to life.
Caution!
Emphasizes what must be done or avoided so that the unit or other property is not damaged.
Notice
Gives recommendations for better handling of the unit during operation or adjustment as well as
for service activities.
1.2 For Your Safety
Warning!
OBSERVE ALL WARNINGS. READ and UNDERSTAND all instructions in the manual before
attempting to install and operate this equipment.
This equipment has been designed and tested for use with Loctite products that can be dispensed
using time and pressure. Products can have a viscosity of up to 80,000 centipoise.
DO NOT USE equipment for other than intended use.
BE SURE that all adhesives, solvents, or fluids used are chemically compatible with the wetted parts
of the equipment.
ALWAYS OBTAIN AND READ the Material Safety Data Sheet(s) before using adhesives, solvents,
or any other chemicals in this equipment. COMPLY with ALL WARNINGS and SAFETY
INSTRUCTIONS AS STATED.
ALWAYS WEAR protective eyewear, gloves, clothing, and respirator as recommended in this
manual or the Material Safety Data Sheet(s).
Any misuse of the equipment or accessories, such as over pressurizing, modifying parts, using
incompatible chemicals, adhesives, or worn, damaged or not recommended parts, can cause rupture or
breakage and result in fluid injection, splashing in the eyes or on the skin, or other serious injury or
property damage.
NEVER alter or modify any part of this equipment. Doing so could result in a malfunction.
CHECK the equipment regularly and repair or replace worn or damaged parts immediately.
NEVER exceed the recommended working pressure or the maximum air inlet pressure stated on the
equipment or in the manual.
Properly ground all electrical components as recommended in the manual or technical data sheet.
Always KEEP HANDS and FINGERS away from moving parts to reduce the risk of injury.
ALWAYS RELIEVE any pressure and turn off all power sources when checking or servicing any
part of the equipment to reduce the risk of serious injury.
RETAIN THIS MANUAL FOR FUTURE REFERENCE.