Labels; Installation; Preparation; Fixed Installation - Chicago Pneumatic CP 0077 Instrucciones De Seguridad Y De Funcionamiento

Bomba para lodos
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
Safety and operating instructions

Labels

Data plate
Machine type
A.
B.
Maximum permitted compressed air pressure
C.
Serial number
The warning symbol together with the book
D.
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
E.
The CE symbol means that the machine is
EC-approved. See the EC declaration which is
delivered with the machine for more
information. If the CE symbol is missing, it
means that the machine is not EC-approved.
Safety label
To avoid injury, before using or servicing tool, read
and understand separately provided safety
instructions.

Installation

Preparation

Always make sure that the pump stands stable on a
level surface.
Depending on the conditions at the worksite, the
pump can be installed in different ways.
If a suction hose is connected to the liquid intake:
10
www.CrowderSupply.com • Toll Free: 888-883-5144
The pump does not need to be partially
submersed into the pumped medium.
Check that the open end of the suction hose is
completely submersed.
The use of a suction hose can affect the pressure
head negatively.
If a suction hose is not used:
Check that the liquid intake of the pump is fully
submersed into the pumped medium.
NOTICE
Never submerse the pump below muffler
level, into the pumped medium. When pumping
from a tank or dam, never let the muffler level be
below the liquid level in the tank or dam.

Fixed installation

The pump is primarily intended for use in temporary
(mobile) applications. If the pump is used in a fixed
installation, make sure that the connections between
pump and pipe are made with a flexible hose.

Hoses and connections

Compressed air source
A.
Water separator (optional)
B.
C.
Max. 10 feet (3 meter) compressed air hose
between the water separator and the machine.
Check that you are using the correct
recommended operating pressure, 87 psig (6 bar).
The maximum permissible air pressure, 90 psig
(6,2 bar), must not be exceeded.
Blow any impurities out of the compressed air
hose before connecting it to the machine.
Choose a suitable hose size from the options
available and connect it to the water outlet on the
pump. For maximum flow with the CP pumps, a
3 in. (76 mm) hose is recommended.
9800 0556 90a | Original instructions
CP 0077

Publicidad

Tabla de contenido
loading

Tabla de contenido