Storage; Preparing The Pump For Storage; Disposal - Chicago Pneumatic CP 0077 Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions

Storage

Preparing the pump for
storage
> After use it is important to flush out the pump
using a clean, neutral liquid. This is particularly
important if it has been used to pump acid, saline
liquids or other severely polluted or aggressive
liquids.
> Pour approximately 1 dl of anti-corrosion oil
directly into the air intake of the pump. Connect
the pump to the compressed air line, and run it
for a couple of seconds.
> After lubricating with an anti-corrosion oil, the air
intake must be plugged.
> When a pump that has been in storage is to be
put back to use, pour a little oil directly into the
air intake before starting the pump.

Disposal

A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in respect to local restrictions.
14
www.CrowderSupply.com • Toll Free: 888-883-5144
9800 0556 90a | Original instructions
CP 0077