Clarion DXZ588RUSB Manual De Instrucciones página 28

01_DXZ588RUSB_EN.book 28 ページ ２００７年１１月２７日 火曜日 午後６時５分
Operations Common to Each Mode
Setting the speed of the title scroll
This function allows you to adjust the speed of
the title scroll.
∗ The factory default setting is "SPEED3".
2-1. Select "SCRL SPD".
3-1. Press the [UP] or [DN] button to select from
"SPEED1 " to "SPEED6
Setting the dimmer control
You can set the dimmer control "HIGH", "MID",
"LOW" or "OFF".
∗ The factory default setting is "MID".
2-1. Select "DIMMER".
3-1. Press the [UP] or [DN] button to select
"HIGH", "MID", "LOW" or "OFF".
Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
∗ The factory default setting is "OFF".
2-1. Select "BLINKLED".
3-1. Press the [UP] or [DN] button to select
"ON" or "OFF".
Setting the external amplifier
∗ The factory default setting is "OFF".
2-1. Select "A CANCEL".
3-1. Press the [UP] or [DN] button to select
"ON" or "OFF".
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
Set the cellular phone connection
mode (TEL-SEL)
You can listen to your telephone calls from the
speakers connected to this unit.
∗ The factory default setting is "AUX".
2-1. Select "TEL-SEL".
3-1. Press the [UP] or [DN] button to select
"AUX" or "CeNET".
28
DXZ588RUSB
".
• AUX:
When you select "AUX", the AUX input
cable is used to connect a AUX
BLUETOOTH BB (BLT373) (sold
separately).
• CeNET:
When you select "CeNET", the CeNET
input cable is used to connect a cellular
phone (BLT583) (sold separately). See
"Bluetooth BB Operations" (page 34-36)
for details.
Setting the car speaker output for the
cellular phone
∗ The factory default setting is "R".
∗ To output the telephone calls, set the cellular
phone interrupt to ON.
2-1. Select "TEL SP".
3-1. Press the [UP] or [DN] button to select "R"
or "L".
• R:
Telephone calls can be heard on the front
right speaker connected to this unit.
• L:
Telephone calls can be heard on the front
left speaker connected to this unit.
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is "OFF".
2-1. Select "TEL SW".
3-1. Press the [UP] or [DN] button to select the
setting in the following order:
"OFF" "ON" "MUTE"
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
pressing the [UP] or [DN] button.
• MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.