Mettler Toledo IND560 Guia De Instalacion página 53

The connection should be wired as shown in Figure 2-37.
NOTES:
1. CONNECTION WITH TWIN AXIAL CABLE (BLUE HOSE) SHOWN.
2. REFER TO ALLEN-BRADLEY REMOTE I/O DOCUMENTATION FOR TERMINATION
RESISTOR AND OTHER CONSIDERATIONS.
3. WIRE SIZE: 14 AWG (2.088 mm2) MAXIMUM
The part number for the Remote IO cable is Belden 9463. It is sometimes referred
to as "Blue Hose" cable.
DeviceNet
The DeviceNet option board (Figure 2-38) is connected to the network by a
DeviceNet-specific twisted pair cable.
Figure 2-38: DeviceNet Option Board
Figure 2-39 indicates the pin numbering of the DeviceNet Option Board connector.,
Wire colors and functions are detailed in Figure 2-40.
1 2 3 4 5
Figure 2-39: DeviceNet Option Board Connector Pin Numbering
IND560 Installation Manual
22 AWG (0.322 mm2) MINIMUM.
Figure 2-37: RIO Connection
2-25