Intended use
The brazed heat exchangers (BHE) have been
designed to perform heat transfer to meet the
requirements of a wide range of applications such as
refrigeration, comfort heating, industrial heating and
cooling and the process industry.
Definitions
Warning: Type of hazard
WARNING indicates a potentially hazardous situation
that, if not avoided, could result in death or serious
injury.
Caution: Type of hazard
CAUTION indicates a potentially hazardous situation
that, if not avoided, may result in minor or moderate
injury.
Note:
NOTE indicates a potentially hazardous situation that, if not
avoided, may result in property damage.
Nameplates
There are different types of nameplates depending on
the type of pressure vessel approval.
Note:
• Other types of nameplates may be used. For detailed
information contact an Alfa Laval representative.
• Some specifications are not used for all types of nameplates
Nameplate shows:
1.
Space for logotype.
2.
Manufacturer's name.
3.
Space for National Board stamp and serial
number.
4.
Article number.
5.
Type.
6.
Manufacturing or serial number.
7.
Year or date of manufacture.
8.
Locations of connections for each fluid.
9.
Max. permissible operating temperatures.
10. Max. permissible operating pressures.
11. Test pressure.
12. Date of test pressure.
13. Volume of each space.
14. Permissible operating temperatures and
pressures.
15. Operating area.
16. Description of each space.
17. Fluid group.
18. Information unique to the customer.
19. Possible locations of connections.
20. Bar code information.
21. Space for mark of approval. (CE marks below are
not valid for nameplate type 3)
– CE-0409 BHE Manufacturing, Ronneby, Sweden
– CE-0036 Alfa Laval (Jiangyin) Manufacturing
Co., Ltd, Jiangyin City, PRC
– CE-0948 Alfa Laval S.p.A. Alonte, Italy.
For non-CE marked units: Directive 97/23/EC
article 3.3 (only valid for nameplate type 1 and 4)
Original instruction
© COPYRIGHT 2010 Alfa Laval Lund AB. All rights reserved
Part number 340500021401
Alfa Laval Brazed Heat Exchangers
3