Operation; Low Battery Warning - Redexim SPEEDSEED 1100 Manual Del Usuario

UNIVERSAL COUNTER UC 300

5. Operation

When the counter is started up for the first time (or after the battery is charged after
having run down completely), the total area counter is shown on the display. The UC
300 is set by default to show metric measurements: the area is given in hectares, the
speed in km/h and the distance covered in metres. The initial sequence is, therefore:
Pressing the "select" button during operation shows the next measurement on the
display, as follows
Select
After selecting a measurement it is possible to reset it by pressing and holding the
"reset" button for 3 seconds (with the exception of the speed of travel, which is
instantaneous data).

6. Low battery warning

When the battery is nearly run down, the arrow under the battery symbol in the top
left-hand corner lights up;
UC 300
+ -
Km/h
-
Prog.
Select Reset
9