Baxtran SCU Manual De Instrucciones página 33

7.3 AUTO SWITCH OFF| UF-3
MODES:
•
AoFF 00 – Auto switch off deactivated
•
AoFF 01 – Auto switch off activated in a minute. The scale is going to switch off automatically after 1 minute of not being used.
• You can configure the value wished from 1 to 99 minutes.
1. Press the key to have an access to the parameter.
2. Press the keys to move the cursor and the key
3. Press the key to confirm.
7.4 DISPLAY BACKLIGHTING | UF-4
MODES:
• A: Automatic.
• ON: Illumination Activated.
• OFF: Illumination Deactivated.
1. Press the key to have an access to the parameter.
2. Press the key to select the desired mode.
3. Press the key to confirm.
7.5 CONFIGURATION OF THE SPEED OF THE CONVERTER |
1. Press the key
2. Press the key
• Mode 1 : Normal
• Mode 2: Fast
• Mode 3: Slow
3. Press the key
7.6 BLIND|
UF-6
It appears 0 on screen until the next division is selected. It starts to show values from that division.
Example:
Scale with e =2g
Blind in 5 divisions
It will show 0 until it reaches 25= 10 g, the first value it will show will be 12g.
1. Press the key
2. Press the key
3. Press the key
7.7 CONFIGURATION OF GRAVITY|
1. Press the key
2. To change the value, press the key
3. Once all the digits have been programmed, press the key
7.8 RS-232 DATA EXIT| UF-8 (WITHOUT FUNCTION)
to access the parameter.
to choose the desired mode:
to confirm.
to access the parameter.
to select.
to confirm..
UF-7
to view the value of the actual gravity.
, next you must use the key
to choose the desired number.
UF-5
to move the cursor.
to confirm.
USER'S MANUAL SCU EN
33