Mettler Toledo IND780 Guia De Instalacion página 38

3. Carefully rotate the front cover 180 degrees and reattach the two grounding straps to the two
2.9.1.3. Attaching the Enclosure to the Brackets
Once the brackets are securely fastened to the wall surface, the enclosure can be mounted to them
using the four supplied M5 screws. One bracket is shown in Figure 2-10, with the slotted holes
indicated. The screws are tightened by fitting the screwdriver through the slotted holes.
2-18 METTLER TOLEDO IND780 Division 2 and Zone 2/22 Installation Guide
Figure 2-8: Ground Strap Attachment Locations
studs near the grip bushings using the two nuts removed in the previous step. Figure 2-9
shows one of the studs. Tighten the two nuts.
Figure 2-9: Stud for Attaching Reversed Front Panel
Terminal Mounting
Holes
Slotted Wall-Mounting Holes
Figure 2-10: Wall-Mounting Bracket
Stud
64063214 | 07 | 02/2018