Start The Thermostat; Use Of The Thermostat; Modification Of T Set Temperature Set - Perry 1TPTE011B Manual Del Usuario

6 - START THE THERMOSTAT

Upon first insertion of the batteries, the thermostat performs a lamp-test
by switching on all display segments, displaying the installed software
version for a few seconds.
The thermostat is operative,
temperature Set at 20°C COMFORT, room temperature detected.
EN
7 - USO DEL TERMOSTATO

7 - USE OF THE THERMOSTAT

7.1 - MODIFICATION OF TEMPERATURE FROM
COMFORT TO NIGHT ECONOMY
Press the Mode key briefly
WINTER= heating (factory setting)
With COMFORT temperature
7.2 - MODIFICATION OF T
Directly press the
The thermostat allows temperature values that satisfy the following conditions:
Winter: t1 greater than or equal to
Summer: t2 greater than or equal to
Every time the or
pressing and holding enables you to scroll through the values rapidly.
Range from +4 °C (antifreeze temperature) to +37,7°C (+39,2°F ÷ 99,9°F).
Factory setting:
Range from+6 °C (antifreeze temperature) to +37,7°C (+42,8°F ÷ 99,9°F).
32
displaying: Winter «heating» mode, the
AND VICE-VERSA
Set TEMPERATURE SET
keys.
t2 greater than or equal to t
t1
keys are pressed, it changes by 0.1 degrees;
Winter mode (heating)
ON ( flashing ) + (fix) e.g. operating boiler
Night economy mode
In the presence of max and min. temperature locks
(see paragraph 11. ) it is not possible to set a 5
higher or lower than the entered locks.
Mode
Set t