Important; Descaling Cycle - Perry 1TPTE011B Manual Del Usuario

11 - CONFIGURATION MENU (installer)
General rule
If Set temperature comfort greater than the maximum entered lock is
If Set temperature t or t2 less than the minimum entered lock is
The following rule will apply to all other temperatures:
WINTER ( ) = COMFORT temperature
SUMMER ( ) = COMFORT temperature

IMPORTANT!

During thermostat operation, the user may not set a

11. - DESCALING CYCLE

6
If the function is activated, the programmable thermostat activates every day
of the year (24h after the last intervention of the relay), for 2 minutes. It
activates the controlled device (pump, valve etc.) to prevent scaling or
jamming caused by prolonged inactivity.
The thermostat activates only if the connected load was never
switched on in the previous 24 hours.
From normal thermostat operation, press the
path -> Set PROG -> POMP ON
select the desired item: POMP ON nO
Press «OK» to confirm.
Press the Mode key twice to exit.
Factory setting upon first switching on the function is disabled.
, it will level out with it.
> night economy temperature
< night economy temperature
temperature Set t
Mode key for secs. follow the 5 ,
-> press «OK» and with the
(NO) or POMP ON 2'.
, it will level out with it.
> antifreeze temperature
higher or lower than the max and min. locks entered
keys
EN
.
/OK
or
/OK
43